Iscar Releases A Completely New Family Of Slitting Cutters Applying Tang-Grip Technology And The Durability Of Sumo Tec Grades

Iscar currently offers a family of high-performance slitting tools that combine the convenience and security of Tang-Grip clamping with the increased sturdiness of the new Sumo Tec insert grades.

The notion, already established successful in Tang-Grip parting tools, has now been extended to slitting cutters. In the patented Tang-Grip clamping system, inserts are press-fit into their pockets accompanying a specialized hand tool, and are held tightly in place without having the need for clamps, upper jaws or set screws that can weaken the insert and disrupt chip flow. The pocket configuration uses cutting forces to keep the insert seated solidly in position, removing any risk of insert pull-out. The Tang-Grip clamping system also fosters increased accurate slitting cuts plus increased pocket and insert life.

Iscar's Sumo Tec insert grades showcase a unique post-coating treatment which substantially improves tool life and constancy.

Launched in late '07, the revolutionary Sumo Tec treatment flattens the insert's coated surface to eliminate microscopic stress raisers, diminish heat and friction and increase chip flow. The result is improved toughness and resistance to chipping and built-up edge, all leading to enhanced tool life. The golden-colored flank on Sumo Tec inserts aides wear detection. Size for size, Tangslit cutters give more teeth than Iscar's SGSF cutters, enabling higher feed rates.

Their superior rigidity leads to straighter, additional accurate cuts and less vibration even in large-diameter cutters. The new Tangslit TGSF cutters come in 100 to 160 mm diameters, 3 and 4 mm widths and can accept the exact same variety of inserts as Tang-Grip parting tools. Additional sizes will be added.

Existing Sumo Tec grades for Tangslit cutters include:
IC808, with a tough submicron substrate below a Sumo Tec TiAlN PVD coating, offering outstanding resistance to impact loads and built-up edge. This grade is endorsed for slitting heat resistant alloys, austenitic stainless steel, hard alloys and carbon steel.

IC830, providing greater toughness for heavier parting and grooving involving interrupted cuts. It is suited for any stainless steel and high temperature alloys.

IC908, a hard, fine-grain substrate with outstanding chipping resistance, joined with a new Sumo Tec TiAlN PVD coating. It is ideal for nodular or grey cast iron.

IC928 and 928A, PVD TiAlN-coated tough grades fitting for stainless steel, high temperature alloys and other alloy steels. These grades are also suggested for interrupted cuts and heavy operations.

Each Tangslit and Tang-Grip inserts are available in J- or C-type chipformer geometries from Iscar.

Iscar Recently Made Public Numerous Original Lines To Continue Their Family Of Milling Cutters
Iscar recently released a new family of High Speed Milling adjustable endmills and facemills that will improve milling of aluminum, non-metallics, cast iron and hardened steel. This should prove especially useful in the automotive and aerospace industries.

Iscar Adds Their Most Recent Innovations To A Extended Line Of Prosperous Hole Generating Solutions
Iscar recently released several different drilling innovations to meet their customers needs. These new products are Sumocham Drill, DR-DH and Deep Drills. Drawing off of their experience Iscar has come up with new and innovative ways to increase productivity for the end user.

A Few Of The Several Advancements In Carbide Inserts By Iscar
Iscar is introducing a new unique milling system with tangential, clamped, butterfly-shaped LNKX carbide inserts. The butterfly-shaped insert has significant advantages compared to the current flat, square shapes. The new geometry has more cutting edges, positive rake face, reduced cutting forces resulting in higher performance.

The Latest In Carbide Endmill Architectures In A Lengthy And Effective Line From Iscar
Manufacturers and die & mold shops can eliminate chatter problems in many milling operations with Iscar's new Chatterfree endmills. The cutters' variable-pitch flute pattern eliminates harmonic vibration, the main source of chatter. This enables faster cutting and finer finish in rough or finish slotting, shoulder milling and cavity milling.

Many Progressions Have Multiplied Iscar's Families Of Indexable Endmills For Elevated Productivity
Helido-Upfeed 04 Two years ago Iscar introduced the extremely efficient H600 indexable endmill line, based on conceptually new Helido-Upfeed double sided inserts with 6 cutting edges. The first insert launched was the H600 WXCU 0806..., which was designed for milling cutters in the diameter range of 50 to 125 mm.

Push Pull Testing For Building Industry Supplying Calibrated Measuring Instruments. Mechanical Load Testing Procedures For On Site Evidence To Testing Demands.
Push Pull Testing for the Railway industry for proof of reliable anchor fixings. Calibrated push pull force gauges are used for stress load testing along with tensile strength pull testing procedures. Proof of load testing undertaken, measured, recorded in a reliable and standard way to BS5080 Part 1 standards.

Commercial Water Heater- Which Is Right For Your Requirements
If you are in the market for a commercial water heater then consider what the needed application is and your overall cost to determine which is best for you. Since there are so many to choose from you may have to do some calculating in order to match the need.

Find A New Job Path With Jaguar And Land Rover.
Even if there is no formal education in medical school, new graduates planning to pursue such graduate careers can undergo training to cover the basics in health care to learn the non-specialized functions of the medical doctor.